Mike Brattland's 1938 Willys Pickup Build Pictures / wb38
2/12/2005 mgbrattland@gerlecreek.com mgbrattland@gerlecreek.com |
Here is a clearer picture of the fabricated
tubular crossmember with urethane mounts. The crossmember is a bolt in affair
and was built from scratch. I used a piece of welding rod to create the shape of
the tube...then took it to a local muffler shop along with a straight piece of
the tubing..... .120 wall stuff and had them do their best to bend the tubing
to match the welding rod....it worked well