This were initial pictures as I prepared to
fit the rear 2x4 inch crossmember for the backhalf suspension. The tubing was
just something handy which I welded inplace to hold the frame square while I
began the work.
| Mike Brattland's 1938 Willys Pickup Build Pictures / wb58
2/12/2005 mgbrattland@gerlecreek.com mgbrattland@gerlecreek.com |
This were initial pictures as I prepared to
fit the rear 2x4 inch crossmember for the backhalf suspension. The tubing was
just something handy which I welded inplace to hold the frame square while I
began the work.